Lake White Ceramic Subway Tile 2.6x16

Lake Glazed Ceramic Tile Installation & Maintenance Guide

Tile Club’s Lake Glazed Ceramic Tile is designed to bring clean color, soft surface movement, and a polished ceramic look to interior tile installations. Its glazed finish makes it a strong choice for backsplashes, feature walls, shower walls, and other approved spaces where visual impact and everyday usability are both important.

When properly installed and maintained, Lake Glazed Ceramic Tile may be suitable for a range of interior wall and light-use applications.

Before beginning your project, please review the following recommendations and confirm the most current specifications, approved applications, and installation guidance.

1. Pre-Installation Inspection

Inspect Before Installation

Inspect all tile before installation. Installing the material confirms acceptance of the product’s appearance, color variation, texture, sizing, finish, and overall condition.

Please contact Tile Club with any questions about product acceptability, visual variation, or suitability before installation begins.

Dry Layout Recommended

Lay out the tile before installation to review shade variation, layout direction, surface appearance, and overall blend.

This product may arrive with a thin protective shipping wax applied at the factory to prevent surface scuffs. This may appear as a slight film on the surface of your ceramic tiles, and is considered normal.

Before installation, wipe tiles with warm water and a pH-neutral cleaner using a soft cloth.

Do not use abrasive or acidic cleaners. Always patch test a small area first and contact us if you need help.

This step helps confirm that the final installation will meet the desired visual result before setting materials are applied.

Installation Responsibility

Tile Club is not responsible for improper installation, installation workmanship, or issues that occur after the material has been installed.

Final responsibility for proper installation rests with the installer and end user. Some tile surfaces may be susceptible to scratching during handling, installation, and use.

Slight color variation from one production run to another should be expected.

2. Recommended Applications

Lake Glazed Ceramic Tile may be suitable for the following applications when confirmed for the specific product:

• 
  Interior walls
  
• 
  Kitchen backsplashes
  
• 
  Bathroom backsplashes
  
• 
  Feature walls
  
• 
  Shower walls
  
• 
  Shower pans, 4x4” only
  
• 
  Steam showers
  
• 
  Light foot traffic areas
  

Important Usage Notes

Lake Glazed Ceramic Tile is not recommended for:

• 
  Exterior use
  
• 
  Heavy traffic floors
  
• 
  Swimming pool installations
  

Always refer to the applicable Tile Club product page and product usage codes to determine suitability for your desired installation. Some products may not be suitable for every application listed above.

For areas exposed to extreme temperatures, including fireplace hearths or areas behind cooktops, confirm suitability before installation.

For additional product or installation guidance, contact Tile Club Support at support@tileclub.com or 1-833-TILE-CLB (845-3252).

3. Installation Recommendations

Tile Club strongly recommends using a licensed tile professional familiar with current NTCA, ASTM, M.I.A., and ANSI installation standards.

Surface Preparation

Install ceramic tile over a clean, sound, flat concrete or mortar substrate.

The installation surface must be free of contaminants or any condition that could compromise the bond of the tile.

Cutting Recommendations

Use a high-quality, well-maintained wet saw with a diamond blade designed for cutting porcelain and ceramic materials.

A poorly maintained tile saw or improper blade may cause chipping during cutting. Cut slowly and carefully to help protect the tile edges and glazed surface.

Grouting Considerations

Grout joints should be fully packed and free of voids and pits.

Clean excess grout from the surface while the grout is still fresh and before it hardens.

Textured surfaces may require additional cleaning during grouting. A grout bagging process may provide better results when working with textured tiles.

Before grouting the full installation, test in a small area to confirm that the selected grout color is suitable and that the tile surface does not scratch during grouting.

4. Recommended Setting Materials

Use setting materials appropriate for glazed ceramic tile and the specific installation area.

Recommended Mortar

• 
  LATICRETE® 254 Platinum Thin-Set Adhesive
  
• 
  Or equivalent setting material suitable for ceramic tile installations
  

Recommended Grout

• 
  LATICRETE® PERMACOLOR® Grout
  
• 
  Or equivalent high-performance grout suitable for ceramic tile
  

Always follow the setting material manufacturer’s instructions, coverage rates, cure times, and substrate requirements.

5. Care & Maintenance

Proper care will help preserve the intended appearance and performance of your Lake Glazed Ceramic Tile installation.

Routine Cleaning

Clean the tile surface with:

• 
  Mild pH-neutral detergent cleaner
  
• 
  Damp sponge
  
• 
  Soft rag or cloth
  

Use gentle cleaning methods to help protect the glazed ceramic surface and grout.

Avoid Harsh Products

Do not use:

• 
  Acidic cleaners
  
• 
  Alkaline cleaners
  
• 
  Solvent-based cleaners
  
• 
  Abrasive cleaning products
  
• 
  Wax treatments
  
• 
  Bleach or cleaning solutions left sitting on the surface
  

These products may damage or discolor the tile and grout.

Prompt Stain Removal

Do not allow stains, soap residue, or cleaning solutions to remain on the tile surface for extended periods.

Clean spills and residue promptly to help maintain the tile’s appearance.

Test Cleaners First

Always test any cleaning product in a small, inconspicuous area before using it across the full installation.

Acceptable cleaners for porcelain, ceramic, and delicate surfaces may be available through Tile Club or other tile dealers.

6. Product Performance & Technical Information

Lake Glazed Ceramic Tile is a glazed ceramic tile intended for approved interior wall, backsplash, feature wall, shower wall, steam shower, and light foot traffic applications.

Product suitability may vary by format and installation area. Shower pan use is limited to the approved 4x4” format.

Material Considerations

• 
  Material Type: Glazed ceramic
  
• 
  Recommended Use: Interior walls, backsplashes, feature walls, shower walls, steam showers, and light foot traffic areas
  
• 
  Shower Pan Use: 4x4” format only
  
• 
  Exterior Use: Not recommended
  
• 
  Heavy Traffic Floors: Not recommended
  
• 
  Swimming Pools: Not recommended
  
• 
  Surface Sensitivity: Some tile surfaces may be susceptible to scratching during handling, installation, and use
  
• 
  Shade Variation: Slight color variation from one production run to another should be expected
  

For product-specific suitability, technical details, or installation questions, contact Tile Club Support before beginning the project.