Spiga Olson Blanco Wood-Look Chevron Porcelain Tile

Olson Porcelain Tile Installation & Maintenance

Tile Club’s Olson Collection brings the warmth, texture, and natural movement of wood into a durable porcelain tile format designed for everyday living. Available in Blanco and Gris colorways, the collection includes classic wood-look planks and a chevron-inspired Spiga format, offering flexible design options for floors, walls, showers, backsplashes, and other approved residential or commercial spaces.

Made for long-lasting performance with the easy-care benefits of porcelain, Olson tile is suitable for a wide range of installations when properly installed and maintained.

Before beginning your project, please review the following recommendations and confirm the most current specifications, approved applications, and installation guidance on the TileClub.com product page for your specific tile.

1. Pre-Installation Inspection

Inspect Before Installation

Inspect all tile before installation. Installing the material confirms acceptance of the product’s appearance, color, shade variation, texture, sizing, finish, and overall condition.

Please contact Tile Club with any questions about product acceptability, visual variation, or suitability before installation begins.

Dry Layout Recommended

Lay out the tile before installation to review the pattern direction, shade range, and tile face variation.

This step is especially important for wood-look porcelain tile, where natural-looking variation helps create a balanced finished installation.

Installation Responsibility

Tile Club is not responsible for improper installation, installation workmanship, or issues caused by unsuitable jobsite conditions.

Final responsibility for proper installation rests with the installer and end user. Slight differences in color, shade, texture, and production runs are normal and should be expected.

2. Recommended Applications

The Olson Collection may be suitable for the following applications when confirmed on the individual product page:

• 
  Exterior applications
  
• 
  Interior walls
  
• 
  Indoor walls
  
• 
  Residential floors
  
• 
  Light traffic floors
  
• 
  High traffic floors
  
• 
  Shower walls
  
• 
  Shower floors
  
• 
  Steam room walls
  
• 
  Commercial floors
  
• 
  Heat areas up to 150°F
  

Important Usage Notes

Olson porcelain tile is not approved for swimming pool installations.

For installations exposed to heat, moisture, steam, exterior conditions, or heavy commercial traffic, always confirm suitability on the individual TileClub.com product page before installation.

For additional product or installation guidance, contact Tile Club Support at support@tileclub.com or 1-833-TILE-CLB (845-3252).

3. Installation Recommendations

Tile Club strongly recommends using a licensed tile professional familiar with current NTCA, ANSI, ASTM, and TCNA installation standards.

Surface Preparation

Install tile over a clean, flat, stable, and properly prepared substrate.

The surface must be free of dust, grease, sealers, loose debris, moisture issues, or contaminants that could affect mortar bond performance.

Cutting Recommendations

Use a professional wet saw with a high-quality diamond blade designed for porcelain tile.

Wet cutting or score-and-snap cutting is recommended during installation. Do not dry cut porcelain tile with power tools.

Cut slowly and carefully to help reduce edge chipping and maintain a clean finish. Follow all applicable safety requirements for silica dust exposure, ventilation, and protective equipment.

Grouting Considerations

Grout joints should be fully packed and free of voids, gaps, and pits.

Clean excess grout while it is still fresh. Do not allow grout haze or residue to harden on the tile surface.

For textured or wood-look surfaces, additional cleaning may be required during grouting. Test the selected grout color and application method on a small area before grouting the full installation.

4. Recommended Setting Materials

Use setting materials appropriate for porcelain wall and floor tile installations.

Recommended Mortar

• 
  LATICRETE® 254 Platinum Thin-Set
  
• 
  Or equivalent polymer-modified thin-set mortar suitable for porcelain tile installations
  

Recommended Grout

• 
  LATICRETE® PERMACOLOR® Grout
  
• 
  Or equivalent high-performance grout suitable for porcelain tile
  

Always follow the mortar and grout manufacturer’s instructions, coverage rates, cure times, and substrate requirements.

Olson Care & Maintenance

Proper routine maintenance will help preserve the appearance and performance of Olson porcelain tile.

Routine Cleaning

Clean regularly with:

• 
  Mild pH-neutral tile cleaner
  
• 
  Warm water
  
• 
  Soft sponge
  
• 
  Microfiber cloth
  
• 
  Non-abrasive mop
  

Rinse the surface as needed to remove cleaning residue.

Avoid Harsh Products

Do not use:

• 
  Acidic cleaners
  
• 
  Alkaline cleaners
  
• 
  Solvent-based cleaners
  
• 
  Abrasive pads or powders
  
• 
  Wax-based treatments
  
• 
  Bleach or cleaning solutions left sitting on the surface
  

These products may damage the tile surface, discolor grout, or leave unwanted residue.

Prompt Spill Removal

Clean spills promptly, especially oils, pigments, soap residue, and staining agents.

Do not allow soap, cleaning products, or standing residue to remain on the tile surface for extended periods.

Test Cleaners First

Always test any new cleaning product in a small, inconspicuous area before applying it across the full installation.

5. Product Performance & Technical Information

The Olson Collection is designed to combine the visual warmth of wood with the practical performance of porcelain tile. Its matte finish, pressed edges, and V3 moderate variation help create a natural wood-look surface while supporting durable residential and commercial use.