Miracle Sealants 511 Seal & Enhance - 1 Pint (16 oz.)

*Please note that tile colors may vary from images due to monitor settings

Miracle Sealants 511 Seal & Enhance - 1 Pint (16 oz.)

SKU: SEENPT6
$35.99
Shipping calculated at checkout.
  • DESCRIPTION
  • REVIEWS
  • PRODUCT Q&A

FINAL SALE - this item is not eligible for returns or exchanges.

ABOUT 511 SEAL & ENHANCE
511 Seal & Enhance Is a unique, solvent-base formula designed to eliminate the need to use an impregnator before using a color enhancer for maximum stain protection and superior color enhancement. 511 Seal & Enhance is safe for use on granite, marble, limestone, natural stone, slate, ceramic tile, quarry tile and grout surfaces.

511 Seal & Enhance will enhance the color and rejuvenate the appearance of tumbled, honed, acid-washed, sandblasted, flamed, textured, even polished stone and tile surfaces. In addition, 511 Seal & Enhance revitalizes old and worn stone and tile installations. It can be used successfully in both interior and exterior environments and is freeze/thaw resistant.

READY TO USE SOLVENT BASE IMPREGNATOR/COLOR ENHANCE FOR:

  • Granite
  • Limestone
  • Marble
  • Ceramic Tile
  • Polished Stone
  • Natural Stone
  • Quarry Tile
  • Slate
  • Grout
  • not for Concrete/Masonry

SPECIAL FEATURES:

  • Superior Stain Protection
  • Interior/Exterior
  • One Step
  • Oil Resistant
  • Water Repellent
  • Will not Yellow
  • Enhances Color
  • Grout Release
  • Easy-to-Use
  • Lasts 3 - 5 Years
  • Good for Floors

      How to Apply Sealer:

      Step 1:
      Wipe down the surface to ensure that it is free from dirt and debris. Protect neighboring surfaces such as carpet and wood floors.

      Step 2:
      Pour the Sealant into an applicator tray and begin applying using the foam applicator. Apply only enough sealant to wet the surface, do not over-apply. Allow the sealer to stand for 3-5 minutes for maximum penetration.

      Step 3:
      Remove all excess sealer with a clean white towel or microfiber towel. Test an area with a few drops of water. If the water absorbs into the material; repeat step 2 after allowing it to dry for 2 hours. If the water does not absorb, the area is ready for foot traffic after 2 hours. The finished area must be kept dry and free of staining materials for 72 hours.

      Prop 65 Warning for CA residents.

      QUESTIONS & ANSWERS

      Have a Question?

      Be the first to ask a question about this.

      Ask a Question