Santorini Blue & White Floral Marble Mosaic Tile

Santorini Tile Installation & Maintenance Guide

Tile Club’s Santorini Collection features decorative mosaic-format designs made with marble stone, natural shell, and brushed brass pieces. This mixed material combination creates a refined surface with natural variation, soft reflection, and warm metallic detail for statement installations.

Because Santorini includes natural stone and shell, variation should be expected from piece to piece. Color shifts, size differences, surface markings, blemishes, and chipped edges may be present. No two pieces are exactly identical, which adds to the natural character and individuality of the finished installation.

Santorini requires careful layout, sealing, cutting, grouting, and maintenance.

Before beginning your project, please review the following recommendations and confirm the most current specifications, approved applications, and installation guidance.

1. Pre-Installation Inspection

Inspect Before Installation

Inspect all tile before installation. Installing the material confirms acceptance of the product’s appearance, color variation, texture, sizing, finish, edge condition, and overall quality.

Please contact Tile Club with any questions about product acceptability, visual variation, or suitability before installation begins.

Dry Layout Recommended

Lay out the mosaic sheets before installation to review stone variation, shell reflection, brushed brass placement, sheet alignment, color blend, and overall finished appearance.

This step is especially important for mixed material mosaics because marble, shell, and brass may vary in tone, texture, and surface character.

Installation Responsibility

Tile Club is not responsible for improper installation, installation workmanship, or issues that occur after the material has been installed.

Final responsibility for proper installation rests with the installer and end user.

2. Recommended Applications

Santorini mixed material mosaic tile may be suitable for approved applications only when confirmed for the specific product.

Application suitability may vary by design, material combination, and installation area. Always confirm the approved use before installation.

Important Usage Notes

Always refer to the applicable Tile Club product page and Product Specifications section to determine suitability for your desired installation. Some products may not be suitable for every application.

Do not assume suitability for floors, exterior areas, showers, steam showers, swimming pools, submerged areas, or high-traffic spaces unless the specific Santorini product page confirms that use.

For areas exposed to extreme temperatures, including fireplace hearths or areas behind cooktops, confirm suitability before installation.

For additional product or installation guidance, contact Tile Club Support at support@tileclub.com or 1-833-TILE-CLB (845-3252).

3. Installation Recommendations

Tile Club strongly recommends using a licensed tile professional familiar with current NTCA, ASTM, M.I.A., and ANSI installation standards.

Because Santorini includes natural stone, shell, and brushed brass, proper installation methods are essential. For specific questions or accepted industry standards related to stone products, refer to the Natural Stone Institute.

Pre-Sealing Recommendations

Natural stone may vary in absorption.

Pre-sealing the stone before installation is recommended to help prevent setting materials and grout from staining the surface.

Use a water-based sealer designed to leave the material looking natural. Suggested sealer brands include, but are not limited to:

• 
  STONETECH® BulletProof® Sealer
  

Always follow the sealer manufacturer’s instructions. Test the sealer in a small area before applying it to the full installation to confirm suitability and appearance.

Surface Preparation

Install Santorini mosaic tile over a clean, sound, flat concrete or mortar substrate.

The installation surface must be free of contaminants or any condition that could compromise the bond of the tile.

Cutting Recommendations

Use a high-quality, well-maintained wet saw with a diamond blade designed for cutting stone materials.

A poorly maintained tile saw or improper blade may cause chipping during cutting. Cut slowly and carefully to help protect the marble, shell, brass details, and mosaic edges.

Grouting Considerations

Grout joints should be fully packed and free of voids and pits.

Clean excess grout from the surface while the grout is still fresh and before it hardens.

Before grouting the full installation, test in a small area to confirm that the selected grout color is suitable and that the surface does not scratch during grouting.

4. Recommended Setting Materials

Use setting materials appropriate for mixed material mosaic tile and the specific installation area.

Recommended Mortars

• 
  LATICRETE® Glass Tile Adhesive Mortar
  
• 
  LATICRETE® 220 Marble & Granite Mortar
  
• 
  Or equivalent setting materials suitable for mixed material mosaics with natural stone, shell, and metal accents
  

Recommended Grout

• 
  LATICRETE® PERMACOLOR® Grout
  
• 
  Or equivalent high-performance grout suitable for mixed material mosaic tile
  

Always follow the setting material manufacturer’s instructions, coverage rates, cure times, and substrate requirements.

5. Care & Maintenance

Proper care will help preserve the natural stone, shell, brushed brass details, and overall appearance of your Santorini mosaic installation.

Routine Cleaning

Clean the mosaic surface with:

• 
  Mild pH-neutral detergent cleaner
  
• 
  Damp sponge
  
• 
  Soft rag or cloth
  

Use gentle cleaning methods to help protect marble, shell, brushed brass, and grout.

Avoid Harsh Products

Do not use:

• 
  Acidic cleaners
  
• 
  Alkaline cleaners
  
• 
  Solvent-based cleaners
  
• 
  Abrasive cleaning products
  
• 
  Wax treatments
  
• 
  Bleach or cleaning solutions left sitting on the surface
  

These products may damage or discolor the tile and grout.

Prompt Stain Removal

Do not allow stains, soap residue, or cleaning solutions to remain on the mosaic surface for extended periods.

Clean spills and residue promptly to help maintain the tile’s appearance.

Test Cleaners First

Always test any cleaning product in a small, inconspicuous area before using it across the full installation.

Acceptable cleaners for natural stone surfaces may be available through Tile Club or other tile dealers.

6. Product Performance & Technical Information

Santorini is a decorative mixed material mosaic tile collection made with marble stone, natural shell, and brushed brass pieces.

These materials create a layered surface with natural variation, reflective detail, and metallic accents. Proper installation and maintenance are important because each material may respond differently to sealing, cutting, grouting, and cleaning.

Material Considerations

• 
  Material Type: Mixed material
  
• 
  Materials: Marble stone, natural shell, and brushed brass
  
• 
  Format: Mosaic sheets
  
• 
  Natural Variation: Color, size, texture, blemishes, and chipped edges may vary from piece to piece
  
• 
  Sealing: Pre-sealing natural stone is recommended before installation
  
• 
  Recommended Sealer Type: Water-based sealer that leaves the material looking natural
  
• 
  Cutting: Use a wet saw with a diamond blade designed for stone materials
  
• 
  Surface Sensitivity: Test grout and cleaning products before full application
  
• 
  Cleaning: Mild pH-neutral cleaners only
  

For product-specific suitability, technical details, or installation questions, contact Tile Club Support before beginning the project.