Summer Gold Real Terrazzo Tile 24" x 24"

Tile Club’s resin terrazzo tiles consist of an epoxy-based base with chips of natural stone. Due to the natural variation found in the stone pieces used to create these tiles, variations in chip size, color, placement, variety, and imperfections will occur from tile to tile. This is intended as part of the organic beauty of these terrazzo tile pieces! 

The Tile Council of North America (TCNA) considers these materials as epoxy tiles’ - please make sure to install according to their guidelines to this type of tile.

Usage for Tile Club Resin Terrazzo Tiles: For the most up to date, check icon codes on the individual product page on tileclub.com

• Interior and Exterior applications
• Wall and Floor applications
• Backsplash walls
• Shower walls/floors
• Steam Showers
• Up to heavy foot traffic* 
• These tiles are not recommended for installation in submerged areas, including swimming pools, fountains, etc.
• (*Please verify high-traffic floor usage and specs with your installer to determine requirements for the space, potential hazards, etc).

How to Install Tile Club’s Resin Terrazzo Tiles:

1. Inspect Tiles upon Delivery

Always inspect your tiles as soon as they are delivered and before they are installed. Please contact us with questions about the material as soon as you receive them. Tile Club cannot authorize any refunds or replacements for tiles that have been installed, as these are considered accepted by the installer and end user. Installation and maintenance are the sole responsibility of the customer.

1. Recommended Installation Guidelines

For the best results, we highly recommend contracting a licensed tile installer experienced in working with concrete/stone tiles. They should be familiar with the guidelines and industry standards of the NTCA, ASTM, M.I.A. and ANSI handbook

• Pre-seal your stone tiles with a penetrating sealant to protect the surface from staining by setting materials and grout. (Suggested sealer brands include but are not limited to: Dupont™ Stonetech® Professional Sealer and Aqua Mix Sealer’s Choice 15 Gold. Please refer to sealers Manufacturer instructions prior to sealing. Test in a small area before sealing entire surface to ensure suitability. Contact your purchase location for additional information on these types of sealers.)
• Lay out your tiles to confirm your preferred placement and arrangement.
• Make sure you have a clean, flat concrete or mortar substrate that is free of dust, contaminants, or other debris.
• If you need to cut your tiles: We recommend cutting these terrazzo tiles with a wet saw fitted with a diamond blade intended for stone tile cutting. Use a fresh saw blade and cut slowly to avoid chipping.
• Apply mortar. Tile Club recommends Laticrete Spectralock® 2000 IG. Follow the application and curing settings on your mortar.
• Install tiles section by section. Allow for a recommended 4mm grout joint between each tile.
• Apply grout once the mortar has cured according to the manufacturer’s instructions.
• Tile Club recommends Laticrete 1600 Unsanded Grout in the color of your choice - tiles are typically pictured with this grout in Bright White. Color choice is at the user’s discretion and preference. Test a small section of the grout to verify the color choice and surface application before grouting the entire area.
• Grout should be applied to fill all joints fully, avoiding gaps. Clean excess grout from the tile surface as you proceed, to avoid it hardening and creating a ‘grout haze’ that can cloud the surface of the tile. Allow grout to cure according to the manufacturer’s instructions.