Fabrique White Chevron Glass Mosaic Tile
- Sheet Size: 10.4x10.4"
- Residential Floor: Yes
- High Traffic Floor: No
- Exterior: No
- Interior Wall: Yes
- Pool/Fountain: No
- Shower Wall: Yes
- Shower Floor: Yes
- Steam Shower: No
- PRODUCT Q&A
The contrast of a dynamic chevron pattern and a chic white tile color features a unique modern appeal, that can highlight any design while complementing any decor! It is a popular option for areas that need more space and light thanks to the luminous glass surface.
Add gorgeous texture to a white interior thanks to the subtle frosted finish of these white glass tile backsplash. The low maintenance, durability, and slip-resistance of glass tile make it an excellent choice for numerous interior projects including bathrooms, dining rooms, kitchens, laundry rooms, and hallways.
These white Chevron tile sheets are attached to a square 10.4" x 10.4" mesh backing and are easy to install in a continuous pattern. You can revamp a large area with stunning glass mosaic flooring, accentuate a room with a captivating chevron backsplash, feature wall, niche, Tv stand, or a decorative border. This product is an ideal tile for shower walls or floors or any surface that needs a luminous touch with on-trend detail.
Frequently Asked Questions about Fabrique White Chevron Glass Mosaic Tile:
Q: Where can I install this Fabrique Chevron glass mosaic tile?
A: Tile Club's Fabrique White Chevron Glass Mosaic Tile is approved for all indoor wall use, including your kitchen backsplash, fireplace surround, accent wall, bar backsplash, shower wall, bathtub surround - you name it! This white chevron tile can also be used for low-traffic residential floors and wet floor areas such as shower floors as it has a high level of slip resistance.
Q: How do I clean frosted glass tile?
A: Glass tiles are loved for messy areas, such as the backsplash behind your stove or the wall behind your bathroom vanity because you can easily wipe up splashes from spaghetti sauce, toothpaste, or mud. That's no different for frosted glass finishes! You can use an ammonia-based glass cleaner like Windex, Dawn dish soap, diluted white vinegar, or a mixture of baking soda and water to remove set stains from your frosted glass tiles. Test out a small application of your preferred cleaning material in a corner of your tile to make sure you're happy with the results. See below for tips on sealing your grout lines to keep them clean, too!
Q: How do I install chevron glass mosaic tile?
A: Start with a clean, smooth substrate. Tile Club recommends using a bright white mortar, like Laticrete Glass Tile Adhesive, to preserve the color of the glass tiles. Using a V-Notch Trowel, apply as much adhesive as you can cover in a 5-10 minute period. Layout the mosaic sheets mesh-side down and use a tile float or a wrapped board to gently tap the sheet into place, ensuring the back of all tile pieces are covered in adhesive. You can use spacers between sheets to set grout lines. Allow up to 48 hours for adhesive to set before applying a non-sanded grout - this tile is shown with Laticrete Bright White grout in board pictures.
Q: Do I need to seal glass mosaic tiles?
A: While these white mosaic glass tiles have a non-porous surface that already helps with sanitization and doesn't need to be sealed, applying a tile and grout sealer to your grout lines can help keep the Bright White grout looking fresh without a lot of scrubbing! Once your grout has fully cured - typically 24-48 hours after applying, use a penetrating sealer to fill gaps in the porous grout, which prevents stains, bacteria, and mildew growth. Grout should typically be sealed every year or so; to test if it's time to reseal, apply a few drips of water to your grout lines and watch if it sinks into the grout or beads on the surface. If it sinks in, it's time to apply fresh sealer!
Sold by: Sheet
Sheet Size: 10.4" x 10.4"
Chip Size: 1.2" x 3.5" + 0.5" x 3.5"
Finish: Glossy, Matte
Mounting type: Mesh Mounted
Recommended Adhesive: Laticrete Glass Tile Adhesive Lite
Area of use:
Prop 65 Warning for CA residents.
QUESTIONS & ANSWERSAsk a Question
Is this bright white or more of a brown/gray color?
The tile is a reflective white that will pick up ambient colors. We recommend ordering a sample to see the color and material in person as well as how it appears in your space.
Is this time clear? No coloring to the back of it? Would the wall need to be floated out and smooth in order to install it? In order for no texture to show through?
This glass tile has a white backing to help preserve the color of the tile regardless of the backing - we do recommend a white glass adhesive to keep the finished product as close to the installations show as possible.
We recommend consulting your tile installer to confirm the best method for your specific area and surface of installation.
Minor chips, scratches and other imperfections are inherent in this product and should not be considered as defects or damages.